The ASI071MC Pro is a popular OSC camera based on the highly appreciated sensor from Sony – the IMX071 – in APS-C format. A good set of specifications combined with a good price makes it a great choice for those who want to take the step from DSLR to a dedicated astronomy camera. Some of the highlights include:
If you are looking for an APS-C type OSC camera for astrophotography, you can’t go wrong with the ASI071MC Pro. It will provide low read noise and a high dynamic range.
ASI071MC Pro camera includes a DDR3 memory buffer to help improve data transfer reliability. Additionally, the use of a memory buffer minimizes amp-glow, which is caused by the slow transfer speeds when the camera is used with a USB 2.0 port.
DDR memory buffer is the main difference between ASI "Cool” and "Pro” cameras.
ASI071MC Pro offers very good performance for astrophotography. Low read noise, high dynamic range.
The Dark Current of ASI071MC Pro is better controlled than before with the help of a DDR buffer and new improved hardware design.
We suppose the QE peak value is more than 50%.
ASI071 Pro includes unique tilt adapter. Say goodbye to tilt problems forever!
USB 3.0 Port: Provide 5Gb bandwidth to make it possible for ASI071MC Pro to run at 10 fps (14bit, normal mode) at full resolution(16Mega).
USB 2.0 HUB: Can connect with various accessories, including a filter wheel, guide camera or electronic focuser, allowing you to manage your cables better. There are two short 0.5m USB2.0 cables included with the ASI071 Pro. The hub is powered by the external power supply if you connect one.
The ASI071MC-PRO camera comes with a completely upgraded anti-dew and mechanical body.
The diameter of the camera body is increased to 86mm compared to the ASI071MC Cool (78mm).
This new structure seals the CMOS chamber better.
Thanks to the two-stage TEC cooling, ASI071MC Pro can lower the CMOS sensor temperature to more than 35-40 degrees Celsius below ambient temperature, which can greatly reduce dark current generation and sensor noise even during extended exposure times.
*The Delta T 35-40℃ is tested at 30℃ ambient temperature. It might get down when the cooling system is working for a long time. Also, as the ambient temperature falls, the Delta T would also decrease.
Please notice that the camera needs to be connected to an external 11-14v power supply to implement the cooling function. We recommend you use 12V@3A DC adapter (5.5*2.1mm, center pole positive) or lithium battery with 11-14V to power the camera. If you don’t have one, please click here to buy a 12V power adapter. There are 4 different standards for different countries, please make sure you selected the correct adapter when placing the order.
The anti-dew heater will heat the AR protect window to avoid any dew problems. The heat anti-dew heater power is around 3.6W and can be turn off in software to save power.
ASI071MC Pro box includes all necessary cables, adapters, and manuals.